DSL DSP Series
(available in black faceplate only)          
The Danley DSLP48 series digital loudspeaker management system is loaded with functions. with its powerful performance and price point it is the first choice among sound engineers and contractors.

       Download DSLP Control Software (14 MB)                                 DSLP User's Guide (PDF)

  • 4 x 8 in out configuration

  • Precise DSP Algorithms

  • High performance audio convertors

  • 8 Bands PEQ per channel

  • Phase Correction

  • Built in Ethernet connectivity

  • Crossovers and Compressors

  • 31 Band 1/3 Octave GEQ per input

General
Power: 90-265 VAC (50 / 60Hz)
Dimensions: 19”x1.75”x9” (483x44x229mm)
Weight: 10 lbs / 4.6 kg

Connectors
Analog: 3-pin XLR
RS-232: Female DB-9
USB: Type B
Ethernet: Standard CAT-5
Power: Standard IEC Socket

Inputs and Outputs
Input Impedance: >10k Ohms
Output Impedance: 50 Ohms
Maximum Level: +20dBu
Type: Electronically balanced

Audio Performance
Freq Response: +/- 0.1dB (20 to 30kHz)
Dynamic Range: 115dB typ. (un-weighted)
CMMR: > 100dB (50 to 10kHz)
Crosstalk: < -100dB
Distortion: 0.002% (1kHz @+4dBu)

DSLA Series Rack Mount Amps
    (available in silver or black faceplate)
 

Designed with touring sound professionals in mind, the DSLA Series power amplifiers faithfully produce high power with low distortion in an extremely lightweight economical package.

Rock stable in stereo or bridged mode operation this series is engineered to exceed expectations, when powering multiple or single loudspeaker enclosures down to a 2 ohm load.

The DSLA Series offer the protection that ensures safe & trouble free shows night after night.
 

  • Dramatically reduced net weight

  • Latest generation of high speed, wide-bandwidth output devices

  • Twin-tunnel cooling with back-to-front air flow

  • Dual, rear-mounted, continuous variable-speed fans

  • Balanced male and femal XLR inputs with switch-configurable XLR polarity and sensitivity selection

  • Speakon® and five-way binding post output connectors

  • Ground-lift switch

  • Front panel circuit breaker switch

  • Modular construction

  • Five-year warranty


Dimensions
19" W x 3.5" H x 12.25" D
(483 mm x 89 mm x 312 mm)

Weight
21.8 lbs. (10 kg)

 

Normal 2 channel

Bridged Mono Power

Model No.

@ 8 Ohms @ 4 Ohms @ 2 Ohms @ 8 Ohms @ 4 Ohms

DSLA 1.7k

290 W 525 W 850 W 1,050 W 1,700 W

DSLA 3.3k

590 W 1,000 W 1,650 W 2,000 W 3,300 W

DSLA 4.5k

825 W 1,450 W 2,250 W 2,900 W 4,500 W

DSLA 6.5k

1,300 W 2,200 W 3,250 W 4,400 W 6,500 W


News & Events | Where to Buy | Contact Us | Jobs | Terms of Use | Privacy Policy
© 2010 Danley Sound Labs. All Rights Reserved.