Danley Technologies

technology-final
Danley’s Vision

Creating the Best Subwoofers and Loudspeakers

For over 20 years Danley Sound Labs has built unique loudspeakers, not re-tooled versions of existing designs. Loudspeaker manufacturers typically make all sorts of claims for their products. Subjective superlatives and promises of performance abound with many of our competitors, but we are most certainly not following the crowd. We invite you to look beyond the magic and behind the grille to see what is inside our loudspeakers. Danley designs cabinets like no one else. Our specifications are confirmed by an independent lab. Experience Danley and feel free to compare us to our competition to determine the best loudspeaker you’ve ever heard.

sound from speaker

Deliver a simple, pure, natural and uncolored sound.		sound wall
Put the sound energy in the audience’s seats, not sprayed over the side walls, ceiling and floors.		sound wave
Maintain directivity control at the lowest possible frequency for the best results.
sh-internal
The Synergy Horn™

The Whole is Greater than the Sum

Every so often, an individual has an idea that changes things in a fundamental way. Danley Sound Labs first major patent – Tom Danley’s Synergy Horn™ – is one of those ideas. The Synergy Horn™ makes it possible to build loudspeakers that perform the way loudspeakers should perform. In the past, horns have fallen out of favor, not because horns are inherently bad sounding, but because no one could figure out how to build a practical full range horn. The Synergy Horn™ allows Danley Sound Labs to build full range, point source loudspeakers which are phase accurate, and consistent in response over the entire coverage angle. The Synergy Horn™ is at the heart of virtually all full range Danley loudspeakers. It is the technology which allows us to put multiple drivers of different bandwidths into a single horn, and make them behave as a single full range loudspeaker.

Synergy Horn Products
th-family-tech
The Tapped Horn™

The “Threat” of the Tapped Horn Subwoofer

The role of the subwoofer is simple; deliver the low end as accurately and efficiently as possible. Why accuracy? Because the music deserves it. Why efficiency? Because the planet needs it. The Tapped Horn Subwoofer™, is the next step in the evolution of the subwoofer. Tom Danley is rightly known for innovation in subwoofer design. His Servodrive subwoofer changed the industry virtually overnight. The bar was raised again with the Tapped Horn. Listen to any one of the Danley Tapped Horn family of subwoofers. It will change the way you think about subwoofers.

Tapped Horn Products
cohearix-graphic
Cohearix Lens Technology

The Next Generation of Danley

Cohearix Lens Technology is the next step in the evolution of Danley loudspeaker technology.

This patent pending technology pulls from prior Danley product innovations but is slightly different. This new lens technology differs as the outer edges, or ends of the radiation, are only ever so slightly down from the center and in this arrangement the height can be made shorter. This allows the high frequency drivers to be placed as close as sitting edge-to-edge. With each “bowtie” producing one segment of a much larger overall radiation arc without a seam they sum into a true single source, the original intention of the Synergy Horn™.

Like an optical lens, one can adjust the focal length of the lens. In typical use in an array, this lens array would be the desired vertical radiation angle (one axis of the radiation angle). Each closely spaced but separate loudspeaker utilizing Cohearix has the arc and offset that makes it radiate in a seamless arc as if it came from a singular source far to the rear of the actual drivers.

Danley Sound Labs

Experience Danley in Person

Find a local distributor and schedule a live demo with one of our many experienced distributors and sound consultants.

Find a Distributor